--A tent is a shelter on the ground for shelter from wind and rain and sunlight and for temporary living.Made of multi-purpose canvas, can be removed and transferred at any time, together with the supporting things.Tents are carried in parts and assembled upon arrival, so a variety of parts and tools are required.To understand the name and use of each part, familiar with the structure of the tent, in order to quickly and conveniently put up the tent.
All Product
Questions
1. Q: The tent pole is bent, what way to straighten it?
A: the head of that pole of the bend is blocked up, from the other end next to inside fill yarn, after fill full pier solid, block up again mouth, in the bend (V or U) gently with wooden hammer (club) beat, not paragraph ground fills sand inside tube, repeat above step, until knock straight, force wants light.The wind resistance strength of the straight rod is reduced, so a slightly thicker pipe sleeve can be found here to increase the strength.If the rubber band is connected to trouble during operation, remove it and then carry out the above operation.
Usually should be in the most stressed part of the net root aluminum or iron pipe, in order to increase the strength.
If it is fiberglass, blow it straight with a hot hair dryer or exchange it at the outdoor club in the upper study for 5 yuan.
2. Q: Why irrigation sand?
A: the purpose of adding sand is to prevent the aluminum tube from deflating and causing a dead bend, and to insert a bicycle steel bar into the aluminum tube under stress is also to increase the strength.
3. Q:Tent packing problem
A:While tent packing may be a trivial matter for some people, it involves the interaction between the manufacturer and the user.
If you often see some outdoor activities outside of the tape, you carefully pay attention to their tents are in the backpack, not as we usually plugins in the backpack, if you are using the foreign system of tent, you will find that their tents with the domestic is the biggest difference is that the camp column and the bill is separate packaging, folding tent cloth, it accord with the inner pack size diameter, cloth make account may be placed on a backpack, and camp column is inserted in the bag on both sides, this is the foreign designers, consider the idea of user, before the posture of the aluminum frame backpack, camp packing problem is not big, but today the mainstream is mounted in the vertical backpack,It is very difficult to bear the domestic design of tent packaging, it is not can not be changed, just want you to give up the original manufacturer design for consumers, natural can also be carried very comfortable.
Average person's approach is to discard the old tent coat, converted to a sleeping bag or waterproof cloth set inside and outside to account, won't appear so tent in a backpack, walk so long longitudinal or walking than the length of the intermediate mountains is no tent far wide of the backpack, think about shouldering vertical hanging in the backpack tents and tie meat appearance such as reed, placed horizontally in the backpack, again afraid hit or fallen tree trunk.